Olympus DP71 사용 설명서 - 페이지 8

{카테고리_이름} Olympus DP71에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus DP71 32 페이지. Microscope digital camera
Olympus DP71에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지)

페이지 인쇄

Getting Ready

1. The camera head uses precision components. Handle it with care and avoid subjecting it to a sudden or severe impact.

2. The image displayed on the monitor may be affected when it is used near equipment generating strong electromagnetic

waves. This is not a malfunction and will not affect the actual image being recorded. To avoid interference during

operation, keep the system far from any source of electromagnetic waves.

3. When mounting the camera head on a tripod, attach it by using the DP-TRAD tripod adapter, which is separately available.

4. Do not use the camera in areas where it may be subjected to direct sunlight, high temperature and humidity, dust or

vibrations. (For the operating environment conditions, see chapter 8, "SPECIFICATIONS" on page 24.)

5. The camera head needs to be calibrated periodically (every 3 months as reference) for the level variations caused by the

influence of cosmic rays. For the calibration method, refer to the Camera Calibration Wizard in the Online Help in the DP-

BSW software.

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirt away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it with gauze slightly moistened with commercially available

absolute alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electric sparks -- for example, electrical equipment

that is being switched on or off.

Also remember to always use these chemicals only in a well-ventilated room.

2. Parts other than the glass components should be cleaned by wiping with a clean cloth. Do not use organic solvents to

remove major stains. Use a soft cloth slightly moistened with a neutral detergent solution.

3. Do not disassemble any part of the camera as this could result in malfunction or reduced performance.

Caution

If the equipment is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the

equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).