Olympus E-3 자주 묻는 질문 - 페이지 9

{카테고리_이름} Olympus E-3에 대한 자주 묻는 질문을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus E-3 26 페이지. E-3 guide de démarrage rapide (français)
Olympus E-3에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 시스템 차트 (1 페이지), 사용자 설명서 (17 페이지), 사양 (6 페이지), 사양 (3 페이지), (빠른 시작 가이드 (2 페이지), (프랑스어) 빠른 시작 가이드 (2 페이지)

페이지 인쇄

Usage

Where can I find the documentation for this camera?

The E-3 is packaged with a printed Quick Start Guide and Instruction Manual. The

documents can also be downloaded in PDF format by clicking here.

Adobe Reader

download

How do I update the firmware in the E-3 camera body and Olympus

E-System lenses?

Firmware updates of Olympus E-System digital SLR bodies and Zuiko

performed using OLYMPUS Master

software has an Update Camera function that is used to initiate the update procedure.

Below are the locations of the update functions in the various software versions:

•

OLYMPUS Master 2.x: In the Browse window's toolbar, click on Update/Language.

•

OLYMPUS Studio 2.x: In the Browse window's toolbar, click on Update/Language.

Before updating, mount an Olympus Zuiko Digital lens to the camera body and set the

camera body's USB MODE to STORAGE. Connect the camera to a computer via its

bundled USB cable. The computer must be connected to the Internet because the

download and installation are managed online from an Olympus server. The camera

battery should be fully charged. The LCD screen on the camera should be facing outward.

When these prerequisites are met, launch the software and click on the update function.

The update process will first poll the camera and lens to determine what firmware

versions are currently installed. It will then ask if you want to search for a newer

version. If it finds a newer version, you will be prompted to perform the update. Step-

by-step instructions will guide you through the process.

Follow the on-screen instructions carefully. If you deviate from the instructions, the

firmware installation may not complete and the firmware may become corrupted. If this

occurs, the camera will have to be sent to an Olympus Repair Service Center to have its

firmware replaced. Do not do a firmware update during a storm or when there is a risk

of losing power because this will also cause a corrupted firmware installation.

Once the firmware is updated, it is not possible to go back to a previous version.

You can check the firmware version of your camera and lens at any time when the camera

is not connected to a computer. Open the camera menu, go to the

scroll to FIRMWARE and toggle right. The LCD will display the firmware version for the

camera body and the currently mounted lens.

Lenses can be upgraded individually using the same update process even if the camera

body already has the most current firmware. Mount a different lens on the body and

repeat the update process as though you were updating the camera body.

Non-Olympus lenses cannot be upgraded using Olympus software. It is strongly advised

not to update an Olympus digital SLR camera body while a third-party lens is mounted.

For support in upgrading third-party lenses, you will need to contact the lens manufacturer.

is required to view the PDF files. The software is available as a

from Adobe's web site.

or OLYMPUS Studio

Page 9 of 26

D I G I T A L T E C H N I C A L S U P P O R T

O L Y M P U S I M A G I N G A M E R I C A I N C .

( 8 8 8 ) 5 5 3 - 4 4 4 8

h t t p : / / s u p p o r t . o l y m p u s a m e r i c a . c o m

Digital lenses are

software. Each version of the

(Custom 2) menu,

Last updated on February 28, 2008

free