AXITEC AXIhycon 10H 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} AXITEC AXIhycon 10H에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AXITEC AXIhycon 10H 8 페이지.

CONNECTING THE SMART METER

Install the smart meter for communication.

CAUTION:

Ensure that the AC cable is completely disconnected from the power source

before connecting the smart meter, EMS, and CT clamps.

NOTE:

Please ensure that the alignment of the current trans-

former (CT clamps) is correct, as otherwise the system

will not function properly.

NOTE:

The pin configuration of the meter port (at the inverter)

follows the EIA/TIA 568B standard.

RS485A on Pin 1: Orange/White

RS485B on Pin 2: Orange

NOTE:

The pin configuration of the Smart Meter for RS485 is as follows:

RS485A is connected to pin 14.

RS485B is connected to pin 13.

AXIhycon-EN231024

RS485B

RS485A