AXITEC 60-CELL 설치 매뉴얼 - 페이지 5

{카테고리_이름} AXITEC 60-CELL에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AXITEC 60-CELL 12 페이지. Solar modules

1.3

CAUTIONS



Use a module for its intended purpose only.



Do not treat any portion of the module with paint or adhesives, to avoid damage to the module,

inoperable conditions, or reducing the module's functionality.



Careful attention to the design of the PV system and electrical capacity of system components is

required (especially the inverter) for the reason that this module may generate more than 120% of

its' STC rated power (Pmax).



This additional power depends upon the level of incident light irradiance (Aledo) available to the

backside of the module, and can be increased or decreased depending upon site characteristics

and installation design.



Please don't uses artificially concentrate sunlight on the modules.



Systems must be installed by qualified and experienced personnel only.

Do not step on the module. Although AXITEC LLC modules are quite rugged, the glass may be

broken (and the module will no longer work properly) if it is dropped or hit by tools or other objects.

Sunlight shall not be concentrated on the module.



The module frames is made of anodized aluminum, and therefore corrosion can occur if the module

is placed in a salt water environment with contact to a rack of an- other type of metal (Electrolytic

Corrosion). If required, PVC or stainless steel washers can be placed between the solar module

frame and support structure to prevent this type of corrosion.



Any module support structures that are to be used to support AXITEC LLC solar module must be

wind rated and approved for use by the appropriate local and civil codes prior to installation.

There are different ways to attach the solar module. The solar module of AXITEC LLC can be attached and

installed with mounting holes or clamps. The module can be installed in both landscape and portrait modes.

Figure 1 shows the different mounting options with the appropriate snow loads.

AXITEC INSTALLATION – USA 170727

5/12