Olympus STYLUS 400 Digital 빠른 시작 매뉴얼

{카테고리_이름} Olympus STYLUS 400 Digital에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus STYLUS 400 Digital 2 페이지. Olympus digital camera quick start guide
Olympus STYLUS 400 Digital에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 기본 매뉴얼 (42 페이지), (스페인어) 빠른 시작 가이드 (2 페이지), (프랑스어) 수동 라피드 드 데마라주 (2 페이지), (네덜란드어) 빠른 시작 설명서 (2 페이지)

페이지 인쇄

Quick Start Guide

START HERE

It is strongly recommended that you follow these step-by-step

numbered instructions to set up and quickly begin using your

new Stylus 300/400 DIGITAL (µ[mju:] 300/400 DIGITAL).

For more detailed instructions on advanced features, please refer to

the printed Basic Manual included in your package, or the Reference

Manual on the CD-ROM.

PREPARING THE CAMERA FOR USE

Before you begin using your Olympus Stylus 300/400 DIGITAL (µ [mju:] 300/400 DIGITAL)...

Charging the battery

The Stylus 300/400 DIGITAL (µ [mju:] 300/400 DIGITAL) uses an Olympus Lithium ion

battery (LI-10B) and dedicated charger (LI-10C). This is the only battery/charger designed for

use with the Stylus 300/400 DIGITAL (µ [mju:] 300/400 DIGITAL). The battery cannot be

charged while in the camera.

Note: The Lithium ion battery is not fully charged when the camera is

purchased. You must fully charge the battery using the charger before first use.

• Insert the Lithium ion battery into the charger as indicated in the illustration.

• Connect the battery charger AC cable as shown to a standard wall outlet.

• To fully charge the battery requires approximately 2 hours. The charge indicator light will be red

when charging, and will turn green when the charging process is complete.

Loading the battery

Note: The battery and xD-Picture card compartments are accessed by opening the

respective compartment covers.

TURNING ON THE CAMERA

All you need to do is slide the lens barrier open or close to turn the camera ON or OFF.

Turning the camera ON

• Slide the lens barrier fully until it clicks. The lens extends.

• To turn the camera off, slide the lens barrier until you feel the first click. Wait until the lens is fully retracted, then

close the lens barrier all the way.

Power on

TIP

:To maximize battery life, the Stylus 300/400 DIGITAL (µ [mju:] 300/400 DIGITAL) features a power saving mode in which the

camera enters a sleep mode after approximately three (3) minutes of non-use.

Setting the Date and Time

Set the date and time when using the camera for the first time. This affects the way image file names are

created, and will conveniently include this information with each picture.

• With the front lens barrier closed, press

monitor. The date and time can also be set from the playback mode.

• Press

to display the top menu.

• Press

to select MODE MENU.

• Press

to select SETUP, and then press

• Press

to select

, and then press

• Use

to select the date format (usually M, D, Y).

• Adjust the date and time in the appropriate fields by using

Repeat this step until all date/time fields have been set.

Note: Time is entered using the 24-hour format.

• Press

to store the date and time.

Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

Card cover

Card cover catch

Connector

cover

USB

VIDEO OUT

connector

jack

VT420101

Two Corporate Center Drive, Melville, NY 11747-3157,

U.S.A. Tel. 1-631-844-5000

24/7 online automated help:

Phone customer support: Tel. 1-888-553-4448 (Toll-free)

Our phone customer support is available from 8 am to 10 pm

(Monday to Friday) ET

E-Mail: [email protected]

Olympus software updates can be obtained at:

Charge indicator

(SHOOTING MODE)

Power off

(OPTIONAL)

once. The monitor will turn on with "NO PICTURE" displayed in the

to select the field, and

Self-timer/

Flash

Remote control lamp

Lens barrier

Remote control

Lens

receiver

OLYMPUS AMERICA INC.

http://support.olympusamerica.com/

http://olympus.com/digital/

UNPACKING THE BOX CONTENTS

Gather your Stylus 300/400 DIGITAL (µ [mju:] 300/400 DIGITAL) and the parts as shown in the illustration. You'll need these

to complete the steps for the camera set-up procedures that follow.

Stylus 300/400

Strap

LI-10B lithium

DIGITAL (µ [mju:] 300/

ion battery

400 DIGITAL)

The following items are also included in the Stylus 300/400 DIGITAL (µ [mju:] 300/400 DIGITAL) package: Basic Manual, video cable,

RM-2 remote control, warranty card, registration card (not provided in some areas), and safety precautions booklet.

• Close the lens barrier.

• Slide the battery compartment cover in the direction of the arrow, and lift

open the cover as shown in the illustration. (the direction indicated by the

mark on the cover)

• Insert the battery into the compartment.

• Close the battery compartment cover so that it pushes the battery in and

slide the cover while pressing the

Note: If the battery compartment cover is hard to close, do

not force it. Press

and then slide it into position.

• To remove the battery, make sure that the monitor and the lamp at the

side of the viewfinder are off. Return the camera to the upright position

and tip the battery out.

Inserting the xD-Picture Card

The xD-Picture Card is where the camera stores your pictures and

is available in a variety of memory capacities. The pictures you take

with the camera remain on the xD-Picture Card even when the

camera is turned off and/or the battery is removed.

• Open the connector cover while pressing the

• Open the card cover by pulling the card cover catch towards you.

• Insert the xD-Picture Card into the spring-loaded card slot as shown in

the illustration. Push the card fully into the slot. The card will lock into

place when fully inserted.

• To remove, push the card all the way in to unlock it, then let it return slowly.

• Close the card cover before closing the connector cover.

• Press

Confirm you have installed the battery and xD-Picture Card properly by

pressing

monitor. Turn the camera off by pressing

Attaching the strap

Attach the strap as illustrated to make the camera easier to handle.

to set the proper value.

DC-IN jack

Note: Depending on the camera settings, not all indicators will be displayed.

cover

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

Premises/Goods delivery:

Wendenstrasse 14-18, 20097 Hamburg, Germany

Tel. 040-23 77 30

Letters: Postfach 10 49 08, 20034 Hamburg, Germany

LI-10C

Battery

CAMEDIA Master

battery

charger

CD-ROM

charger

AC cable

mark.

on the cover firmly to close the cover,

mark as in the illustration.

to close the connector cover.

. The "NO PICTURE" message should be displayed in the

again.

(OPTIONAL)

Shutter button

Green lamp

Orange lamp

Viewfinder

Monitor

Monitor button (QUICK VIEW

)

Arrow pad (

Shooting mode button

Macro button

Self-timer button

Battery

component

cover

Camera Settings in Shooting Mode as shown in Monitor

Shooting mode

Battery check

Green lamp

Flash stand-by

Macro mode

Flash mode

Sequential shooting

Self-timer/Remote control

Record mode

Resolution

Camera Settings in Playback Mode as shown in Monitor

Battery check

http://www.olympus.com/

USB cable

xD-Picture Card

(gray color)

Zoom button

Strap eyelet

OK/Menu button

)

Flash mode button

Tripod socket

Exposure compensation

Metering

White balance

AF target mark

Memory gauge

Number of storable

still pictures

Print reservation

Number of prints

Protect

Record mode

Resolution

Exposure compensation

White balance

Date and time

File number

(still picture)

Printed in Japan