Olympus DS-9500 관리 매뉴얼 - 페이지 19
{카테고리_이름} Olympus DS-9500에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus DS-9500 22 페이지. Wireless communication service
페이지 인쇄
6
Troubleshooting
If you cannot send dictation files on DS-9500 to folders, check the following points on each component of
your system.
DS-9500
Possible Cause
Wi-Fi is turned off.
The recorder is in a location that
radio signals cannot reach.
The wireless settings of the network
are incorrect.
The settings of the wireless
download feature are incorrect.
Computer running Wireless Communication Service
Possible Cause
Cannot connect to the computer
running Wireless Communication
Service
Wireless Communication Service is
stopped.
The port number used by Wireless
Communication Service is blocked.
Do the following with the recorder:
1. Select Device menu > Wi-Fi > On/Off.
2. Select On, and then press the OK/MENU button.
Check for obstacles between the recorder and access points.
Check whether the signal strength icon (
LCD display of the recorder.
Check the wireless settings configured on the recorder. Refer
to chapter 5, "Wireless Network".
Select Device menu > Wi-Fi > select a network, and then
check that the recorder is connected to the network that you
want to connect to.
Select Device menu > Device Information, and then check
that the correct IP address of the network is shown.
Check the settings for wireless download on the recorder. Refer
to chapter 5, "Wireless Download".
Make sure the computer is turned on and connected to the
network.
Do the following with the computer:
1. Click Start > Server Manager.
2. In the Server Manager console, click Tools > Services.
3. Make sure that the status of Wireless Communication Service
is Running.
Make sure the connection to the port used by Wireless
Communication Service is not blocked on your system.
Action
) is shown on the
Action