Olympus VN-5200PC 사용 설명서 - 페이지 3

{카테고리_이름} Olympus VN-5200PC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus VN-5200PC 13 페이지. Enregistreur vocal numerique
Olympus VN-5200PC에 대해서도 마찬가지입니다: 지침 (2 페이지), (프랑스어) Mode D'emploi (13 페이지)

페이지 인쇄

h Inserting Batteries

Replacing the Batteries:

When [N] appears on the display, replace the batteries as soon as possible. Size-AAA alkaline

batteries are recommended. When the batteries are depleted, [O] appears on the display, and

the recor-der shuts off.

• To replace the battery, make sure that you set the HOLD switch to the opposite direction of the

arrow before replacing.

h Power Supply

hHold

Setting the HOLD switch to the direction of the arrow holds the current status, and all button

operations are disabled. Remember to release the HOLD switch to use the recorder.

h Setting Time and Date [Time & Date]

If you have set the time and date, information as to when a sound file was recorded is stored

automatically with that file.

When you install batteries for the first time or each time you replace the batteries, the

"Month" indication will flash. In such a case, be sure to set the time and date by following

steps 4 through 6 described below.

1 Lightly press down on the arrow and

slide the battery cover open.

2 Insert two size-AAA alkaline batteries,

observing the correct polarity.

3 Close the battery cover completely.

• When the HOLD switch is set to the direction

of the arrow, the display is turned off after

[HOLD] is displayed. Follow the next step

without regard to it.

An optional Ni-MH Rechargeable Battery (BR401)

from Olympus can be used for the recorder.

Power on: Slide the HOLD switch in the direction

opposite that indicated by the arrow.

Power off: Slide the HOLD switch in the

direction indicated by the arrow while the

recorder is not in operation.

Standby Mode and Display Shut Off:

If the recorder is stopped for 5 minutes or longer during

recording or playing, it goes into Standby (power-save)

mode, and the display shuts off. To exit Standby mode

and turn on the display, press any button.

1 Press and hold the DISP/MENU button for 1

second or longer to go to the main menu.

2 Press the 9 or 0

button to select

[Sub Menu].

3 Press the PLAY/OK (`)

button.

• [Time & Date] appears on the

display, and [

4 Press the 9 or 0

button to select the item

to set.

• Select the item from "Month",

"Day", "Year", "Hour" and

"Minute" with a f lashing

point.

Time & Date

] flashes.

1. 1'08 12:00 AM