Olympus VN-702PC 자세한 지침 - 페이지 12

{카테고리_이름} Olympus VN-702PC에 대한 자세한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus VN-702PC 45 페이지. Gravador digital de voz
Olympus VN-702PC에 대해서도 마찬가지입니다: (영어) 자세한 지침 (45 페이지), (프랑스어) Mode D'emploi (45 페이지), (포르투갈어) 사용 지침 (45 페이지)

페이지 인쇄

Setting time and date [ Time & Date ]

If you set the time and date beforehand,

the information when the file is recorded is

automatically stored for each file. Setting

the time and date beforehand enables easier

file management.

When you install batteries for the

first time or each time you replace

the batteries, the "Hour" indication

will flash.

Press the 9 or 0 button to

select the item to set.

• Select the item from the " Hour ",

" Minute ", " Year ", " Month " and " Day "

with a flashing point.

Press the + or − button to set.

Repeat steps 1 and 2 to set the

other items.

9 or 0 button:

Move to the previous/next item.

+ or − button:

Change the value.

• You can select between 12 and

24 hour display by pressing the

FOLDER/INDEX button while setting

the hour and minute.

• You can select the order of the

" Month ", " Day " and " Year " by

pressing the FOLDER/INDEX button

while setting them.

Press the ` OK button to

complete the setting.

• The clock will start from the set date

and time. Press the ` OK button

according to the time signal.

Notes

• If you press the ` OK button during the

setup operation, the recorder will save

the items that were set to that point.

• While the recorder is in stop mode, press

and hold the STOP ( 4 ) button to display

[ Time & date ] and [ Remain ].

Changing the time and date

Select [ Time & Date ] from the menu on

the [ Device Menu ].

• See "[ Menu setting method ]"

( ☞ P.26)