Olympus WS-210 사용 설명서 - 페이지 12

{카테고리_이름} Olympus WS-210에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus WS-210 15 페이지. Olympus ws-110: user guide

Olympus WS-210 사용 설명서

Other Functions

Index Marks

If index marks are placed, you can quickly find a location you want to listen to in fast
forward and fast rewind and when cuing a file.
Setting an Index Mark
1
2
Press the
recording) or playback to set an index mark.
A number appears on the display and an index mark will be
placed.Even after an index mark is placed, recording or
playback will continue so you can place index marks in other
locations in a similar manner.
Clearing an Index Mark
1
Locate the index you want to clear.
2
9
Press the
1
and press
1
Press the
(ERASE) button while the index number appears
for approximately 2 seconds on the display.
The index mark is erased.
sIndex marks cannot be placed on files created on machines other than Olympus IC
recorders, but temp marks can be placed instead to temporarily remember desired
locations. The operation procedure is the same as that of the index mark.
sTemp marks are temporary markings, so if you move to another file, or connect the
recorder to a computer, they will be automatically erased.
sUp to 16 index and temp marks can be set in a file.
sIndex or temp numbers after the erased index or temp number will automatically
move up.
sIndex or temp marks cannot be set or erased in a locked file.

Connecting to Your PC

Apart from using this unit as a recorder, you can use it as an external memory for your
computer, as a storage device.
sYou can save the voice files recorded with this recorder on your PC as back-up.
sYou can save images, text data, etc. on this recorder.
sThe recorder will record in WMA (Windows Media Audio) format.
sThe audio files recorded by this recorder can be played back on your computer using
Windows Media Player. You can also transfer the WMA files downloaded with Windows
Media Player to your recorder and enjoy them (excluding files with copyright protection).
1
Before you detach the recorder, set the HOLD switch
in the direction indicated by the arrow, and make sure
that the display is turned off.
If you detach the recorder before the display is turned
off, data may be damaged.
2
Connect the recorder's USB terminal to a PC USB
port or USB hub.
Once "Remote" is displayed, you can save or read the data.
"
PC" is displayed while sending the data. "
displayed and the record/play indicator light flashes while
receiving the data.
3
Transfer the audio files to your computer.
Connect the recorder to your computer and launch Explorer.
The recorder will be recognized as a removable disk.
Each of the five folders is named as DSS_FLDA, B, C,
D and E. The audio files are saved in these folders.
All the audio files recorded by this recorder will be in
WMA format.
( i.e. WS_110001.WMA)
You can copy them to any folder on your computer.
Double click the audio file, and Windows Media Player
will be launched and start playing back.
If you are using Windows 2000, Windows Media Player
must be installed on the PC.
4
Click the
on the task bar located at the lower-right
corner of the screen. Click [Safely Remove Hardware].
(INDEX) button during recording (pause
0
or
to select the index mark to delete,
(ERASE) button.
PC" is
- 12 -
- 12 -
USB terminal
Sending the date
Receiving the data