Olympus BHT 사용 설명서 - 페이지 11
{카테고리_이름} Olympus BHT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BHT 22 페이지. System microscopes
페이지 인쇄
V.
OPERATION
A.
Switching on the Light Source
1)
Ascertain
that
the
voltage
selector
switch
@
is
set
to
conform
with
the
local
mains
volt-
age.
(Fig.
4)
If
the
switch
is
not
correctly
set,
adjust
i t
by
means
of
the
Allen
wrench
provided
or
a
screwdriver.
2)
Place the sliding voltage control lever on the
right side of the microscope base to
a
posi-
tion closest to you (low voltage position).
Switch on the light source. (Fig. 4)
Voltage Adjustment and Light Intensity
1
As you push the control l e v e r a in the direc-
tion of the arrow in order to obtain increas-
ing intensity (Fig. 5), the LED readout
@
will display the lamp voltage.
B.
Placement of a Specimen Slide
1)
Rotate
the
coarse
adjustment
knobs
in
the
direction
of
the
arrow
to
rack
down the
stage
so
that
a
specimen
slide
can
be
placed
on
the
stage.
(Fig.
6)
NOTE: The rotation of the coarse and fine
adjustment knobs in the direction of
the arrow will rack down the stage.
2) Opening the spring-loaded finger of the
specimen holder with one hand, place a
specimen slide inside the holder. (Fig. 7)
When the slide comes in contact with the
back of the specimen holder, slowly return
the spring-loaded finger.
WARNING: If the spring-loaded finger is
returned quickly, it may cause
damage to the specimen slide.
I
-
Fig. 4
Fig.
5
Fig.
6
Fig. 7