Olympus BX3-MDOE 사용 설명서 - 페이지 22
{카테고리_이름} Olympus BX3-MDOE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX3-MDOE 40 페이지. For 2, 5, 9, 10 and 13 persons
페이지 인쇄
1
2
2
3
d
18
b
a
Rubber leg position
Rubber leg position
c
e
2
Attaching the stand
1
Place the side viewer on the desk upside down and screw the b
portion of the stand into the mount screw hole a of the side viewer.
2
Loosen the stand height lock knob c . Rotate the
in the picture and place one of three rubber legs attached to the back
side of the base of the stand so that it is parallel to the tube of the side
viewer as shown in the picture.
3
Move the
portion shown in the picture up and down so that the
d portion of the stand is 24 mm, and tighten the stand height lock
knob e .
If there is a difference in height between the desk top surface
TIP
where the microscope frame is installed and the desk top
surface where the side viewer is installed, adjust the length
of the d portion of the stand. For example, if the height
difference is 5 mm (if the desk top surface of the microscope
frame is higher than the desk top surface of the side viewer),
d will be 29 mm.
portion shown