Olympus BX41 사용 설명서 - 페이지 5

{카테고리_이름} Olympus BX41에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX41 36 페이지. System microscope
Olympus BX41에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지)

페이지 인쇄

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equip-

ment in the safest possible manner.

Symbol

Warnings

Warning engraving/stickers are placed at parts where special precaution is required when handling and using the

microscope. Always heed the warnings.

Should warning stickers become soiled, peeled off, etc., contact Olympus for replacement.

Getting Ready

Fig. 3

Indicates that the surface becomes hot, and should not be touched with bare hands.

Before use, carefully read the instruction manual. Improper use could result in personal injury to

the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Warning engraving

position

Warning sticker

position

1. A microscope is a precision instrument. Handle it with care and avoid

subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight, high

temperature and humidity, dust or vibrations. (For the operating condi-

tions, refer to section 5, "SPECIFICATIONS".)

3. When moving the microscope, remove the specimen and modules that

may drop during transport and carefully carry it with the grasping part on

the rear of the arm and the base as shown in Fig. 3 (Weight: approx. 13 kg).

Be sure to remove the specimen @ that is likely to drop and the filter ²

on the filter mount.

# If an intermediate attachment hinders you grasp the grasping part

on the rear, remove the intermediate attachment before carrying.

# Damage to the microscope will occur if you grasp it by the stage,

coarse/fine adjustment knob or binocular section of the observa-

tion tube.

4. The BX41 can be used with up to two intermediate attachments (e.g. a U-

CA magnification changer, U-EPA2 eyepoint adjuster, etc.). For restrictions

when using two intermediate attachments, make sure to read the in-

struction manual provided with the respective intermediate attachments.

# The microscope becomes unstable particularly when the U-TRU

trinocular attachment is attached on the side position or the

microscope height is increased. In this case, take measures for

preventing the microscope from toppling down.

Explanation

Lamp socket

(Warning against high temperature)

Microscope frame rear panel

(Warning against high temperature)

BX41