Olympus BX43 사용 설명서 - 페이지 7

{카테고리_이름} Olympus BX43에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX43 48 페이지. System microscope

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirt away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

· Since the absolute alcohol is highly flammable, it must be handled carefully.

CAUTION

Be sure to keep it away from open flames or potential sources of electrical sparks --- for example, electrical

equipment that is being switched on or off, which could cause ignition of a fire.

Also remember to always use it only in a well-ventilated room.

· Set the main switch to "

to maintenance.

2. Do not use organic solvents to clean the microscope components other than the glass components. To clean them,

use a lint-free, soft cloth slightly moistened with a diluted neutral detergent.

3. Do not disassemble any part of the microscope except for the parts that are specified to be disassembled in this manual,

as this could result in malfunction or reduced performance.

4. After using the microscope, set the main switch to "

halogen bulb has been used,) and keep it covered with a dust cover during storage.

5. Before disposing of this product, be sure to follow the regulations and rules of your local government.

Caution

If the microscope is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

CAUTION

}

This instrument has been designed to be used to observe magnified images of specimens in various routine work and

research applications.

Do not use this instrument for any purpose other than its intended use.

This instrument is considered a medical device in the following countries: US, and China.

This device complies with the requirements of directive 98/79/EC concerning in vitro diagnostic

medical devices. CE marking means the conformity to the directive.

" (OFF) and wait for the lamp housing to cool down sufficiently before proceeding

: Indicates a potentially hazardous situation which, if not avoided, may result in minor

or moderate injury or damage to the equipment or other property. It may also be used

to alert against unsafe practices.

: Indicates commentary (for ease of operation and maintenance).

" (OFF), (wait for the lamp socket to cool down sufficiently if the

BX43