Olympus CH20 수리 매뉴얼 - 페이지 6

{카테고리_이름} Olympus CH20에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CH20 31 페이지. Biological microscope

페이지 인쇄

CH10/CH20

(3) The dust-proof observation tube keeps off dust and also anti-fungus treatment for it is effective

for protecting from fungus.

(4) The handhold enable you to hold the microscope frame easily.

(5) LB objective of 45 mm focal distance is employed.

4. Using Conditions

(1) Standard performance cannot be ensured in combination with objectives other than NEA series,

PCDA10XPL, PCDA40XPL, and EA60X.

(2) Standard performance cannot be ensured in combination with eyepieces other than

NCWHK10X (for binocular/ monocular observation tube) and ER15X (for monocular

observation tube).

(3) Intermediate attachment, photomicrographic unit, and TV unit can not be used.

(4) Condenser is provided as a standard, and it is not interchangeable.

(5) Standard performance cannot be ensured in combination with units other than darkfield central

stop (CH2-DS), phase contrast attachment (CH2-RS10, RS40), and attachment lens (CH3-

AL).

(6) CH2-DS can not be used for objective 4X and 100X.

(7) Field diaphragm unit and attachment lens (CH3-FS, CH3-AL) can be attached optionally.

However, use them for objective 40X or less.

(8) When FS and AS are stopped down to the minimum, ghost may occur.

(9) Mechanical stage is not interchangeable.

(10) Micrometer eyepiece cannot be attached to the binocular observation tube.

(11) Operating environment temperature: 5°C - 40°C, humidity: 30 - 80 %

(12) Blue filter (LP5146), which is made from plastic, should not be wiped off with organic

detergent.

5. Specifications

Items

Observation

tube

Revolving

nosepiece

Stage

A. OUTLINE OF PRODUCT

Specifications

1) Circular dovetail type, rotatable for 360°

2) Anti-fungus treatment

3) Eyepiece sleeve diameter: φ23.2 mm

4) MO45 inclination angle: 45°

5) BI45 Jentsh type inclination angle: 45°,

interpupillary distance adjustment : 53 - 75

mm, left diopter compensation: ±5 Diopter

1) Fixed quadruple revolving nosepiece (with

front side facing upward)

2) Center bearing type

Arm and revolving nosepiece integrated (fixed)

1) Fixed plane stage

2) Fixed mechanical stage (with C20-MVR)

3) Dimensions: 120 × 120 mm

A-2

Remarks