Olympus CHD 사용 설명서 - 페이지 3

{카테고리_이름} Olympus CHD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CHD 17 페이지. Biological microscope
Olympus CHD에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

BEFORE USE

Observe the following procedures carefully:

Operation

Since the microscope is a precision instrument, always handle it with care, and avoid abrupt motions or

impacts.

Avoid exposure to direct sunlight, high temperature and humidity, dust and vibration.

Never direct the sunlight to the microscope mirror while adjusting illumination in order to protect your

eyes from the sunlight.

@ Only use the tension adjustment ring for altering the tension of the coarse adjustment knobs.

Be careful not to soil lens surfaces with dust, fingerprints, etc.

Maintenance and Stora

Use a clean brush or lens tissue paper to clean the lens surfaces. If the lens surfaces are soiled with oil or

fingerprints, wipe them off carefully with gauze moistened with a small amount of alcohol and ether

(3: 7) solution, or xylene.

Do not use organic solutions (e.g. thinner, xylene, ether, alcohol, etc,) to wipe painted surfaces of various

components, and especially, plastic parts. When extremely soiled, they should be cleaned with a neutral

detergent.

@ Do not disassemble any part of microscope, since the integrated performance may be impaired.

@ When not in use, the microscope should be covered with the dust cover provided or contained in a storage

case, and kept in a place free from humidity and mold.

Attaching the fixing blocks of the microscope stand In the wooden storage

case

ICHO·\)VB)

(optionally available)

The fixing blocks should be screwed at the bottom of

the storage case in the following procedure:

1) Insert the screw into a flat washer and one of the

two holes (8 mm dia.) in the base plate of the case

as illustrated at the right.

2) Tighten the screw to clamp one block by means of

the spanner provided.

3) Clamp the other block on the opposite side.

Fixing block

Storage

case

Flat

washer