Olympus CHT 사용 설명서 - 페이지 18
{카테고리_이름} Olympus CHT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CHT 24 페이지. Biological microscopes
Olympus CHT에 대해서도 마찬가지입니다: 사용 설명서 지침 (23 페이지)
페이지 인쇄
Fig. 28
fJ
Mounting the OM camera back
1)
Mount the photo ey piece adapter P,'v1·ADF
C1;
(into which a choice of
NFK photo eyepiece is inserted), Photomicro adapter {MOM-U
~2~
and
OM camera back '3; on the photo tube in t his order. (F ig. 28)
2) The compatible photo eyepieces are NFK3.3X and NFK5X.
3) Bring the specimen into focus. looking through the viewfinder of Ihe
camera.
4) Photomicrographic magnification equals the objective magnification
multiplied by the photo eyepiece magnification.
*
To take a good photomicrograph with a single lens reflex camera back, a shutter speed at 1/2 second or
slower is recommended so as to reduce the mirror·lockup shock.
Use of the light balancing filter 45 LBD-2N
(optionally available)
1)
Remove the blue filter from the condenser.
2) Slip a 45LBD-2N filter into the filter mount
CG
at the light exit on the
microscope base. (F ig. 29}
3) Turn the voltage control dial
(2)
until the dial is aligned at the gradua·
tion "10" (maximum), and daylight color can be obtained. {For CHS
only)
*
The 45LBD-2N filter cannot be used with the CHT microscope for
color temperature regulation.
Fig. 29
6-3
Color Temperature Regulation (for use of dayligbt color film)
I
~===::~~~~:--::=--==-:~=----:----=------====~
D
>-
J:
Q..
<:(
cc
t=l
o
cc
o
:2
o
r
o
J:
Q..
The
optionally
available color balancing
filter 45LBD·2N
is sr;ec;all\' designed
10
obtain a beller color rendition for daylight
\Yr;e color film thi:l.n a blue lilter.
D
Use of the
b~ue
filter 32.5C-2
1)
Engage the blue filter as used for observation in the condenser.
2)
To obtain color temperature for daylight type film, set the voltage
control dial
(~)
at the graduation
"9"
for CHS. or at the graduation
"10" for CHT.
*
If a photograph tends to overexposure, do not change the voltage control dial, but apply an optional N.D.
filter (45mm dia.) to the filter mount at the light exit on the microscope base.
*
Since the blue filter tends to characteristically leave somewhat a yellowish tint, an optionally available
45 LBD-2N is recommended for better improvement of color rendition in conjunction with the CHS micro-
scope. However, the CHT microscope can be used only with the blue filter for color temperature com-
pensation.
1 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - -