Olympus CX43-RFAB 사용 설명서 - 페이지 12
{카테고리_이름} Olympus CX43-RFAB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CX43-RFAB 24 페이지. B excitation fluorescence illuminator
페이지 인쇄
- 1. Table of Contents
- 2. Introduction
- 3. Safety Precautions
- 4. Nomenclature of Microscope Operating Portions
- 5. Reflected Fluorescence Observation Method
- 6. Operation Procedures
- 6. Operating the B Excitation Fluorescence Illuminator
- 6. Escaping the Condenser Top Lens
- 7. 4 Assembly
- 7. Attaching the B Excitation Fluorescence Illuminator
- 7. Connecting the AC Adapter and Power Cord
- 7. Attaching the Hook Stick Holder
- 8. Specifications
3
Operation procedures
1
Operating the B excitation fluorescence illuminator
b
8
For attaching and removing the B excitation fluorescence
TIP
illuminator, see page 10.
1
Set the main switch
to (ON).
When the B excitation fluorescence illuminator is not in
TIP
a
use, slide it in the arrow direction until it touches the end to
remove it from the light path.
· When attaching various intermediate attachments, if
NOTE
the brightness adjustment knob of the B excitation
fluorescence illuminator is interfered or cannot be
operated, the intermediate attachment must be attached
again by changing its angle.
· When carrying the microscope, be sure to remove the
B excitation fluorescence illuminator in advance, since it
may be in danger of dropping.
Adjusting the brightness
1
Rotate the brightness adjustment knob
a
of the B excitation fluorescence illuminator
b
to adjust the brightness.