Olympus Fluoview FV1000 간단한 지침 - 페이지 3
{카테고리_이름} Olympus Fluoview FV1000에 대한 간단한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus Fluoview FV1000 7 페이지. Confocal microscope
Olympus Fluoview FV1000에 대해서도 마찬가지입니다: 개요 (28 페이지), 사용자 설명서 (42 페이지), 간단한 지침 (7 페이지), 사용자 설명서 (9 페이지), 매뉴얼 (3 페이지)
페이지 인쇄
Olympus FV1000
2. General guidelines
1. Lab rules:
This room is a S2 laboratory.
At times when S2 experiments are performed in this room, you are not
allowed to enter the room. S2 experiments will be indicated by a sign at the
outside of the door and in the online booking system.
When no S2 experiments are performed everyone who is authorized by the
facility staff can enter the room.
You always have to wear a lab coat. Lab coats can be left in the cupboard,
first door left from the entrance.
2. Booking and keys:
Before you can use a microscope you have to make a reservation in the online
booking system.
Always pick up a key from Wolfgang Posselt in room 1052. Office hours: Monday
to Friday. If you are planning to use a microscope outside these hours, pick up a
key in advance.
When you are leaving lock the microscope room and after 17:00 also look the
main door of the facility. Return the key to Wolfgang Posselt or to the mail box of
the Laser Microscopy Facility, level S, in the hallway left from the stair case,
second row, in the center.
3. Climatisation control:
Please note in the online reservation the desired temperature.
Wolfgang Posselt will switch on the temperature control early in the morning to
ensure that the incubation chamber has reached the temperature when you start
your experiment.
But you are responsible for setting CO
the climatisation control. Read chapter 4. "Using the climatic chamber".
4. Immersion oil:
Always remove old immersion oil, before you add new ones.
Only use the lens tissues provided by the Laser Microscopy Facility staff.
In case there is oil on no-oil objectives, don't try to clean them but leave a note
in the log book.
-3-
and humidity as well as for switching off
2
Short instructions