Olympus GX41 사용 설명서 - 페이지 31

{카테고리_이름} Olympus GX41에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus GX41 32 페이지. Compact inverted metallurgical microscope

LAMP SOCKET INSPECTION SHEET

{Study the instruction manual for the lamp socket before inspection.

{For safe use of the lamp socket, we recommend performing the following inspection periodically (every time you replace the

lamp bulb and at least every 6 months).

{The table below identified the check items to be observed. Put (X) if not applicable or ( ) if applicable.

{If there is any ( ) mark noted, immediately stop use of the product, and consult Olympus for detailed inspections or replace

the lamp socket.

{If you detect an abnormality other than that listed below or with other Olympus product, also stop the use of the product and

contact Olympus for detailed inspections.

{Note that the service, replacement and detailed inspections are charged after expiration of the warranty period.

1. More than 8 years have passed since original purchase or the total power ON

time exceeds 20,000 hours.

2. Lamp does not light sometimes even though the main switch is set to on.

3. Illumination flickers when you move the lamp cable or lamp socket.

4. Lamp cable is unusually hot to the touch.

5. Scorching or burning odor is produced during use.

6. Illumination still flickers after replacement with a new lamp bulb.

7. Deformation, backlash, or looseness, etc. when you assemble the lamp socket.

8. Extreme discoloration of the lamp socket connection terminal or lamp socket

lamp bulb mount.

9. Discoloration, deformation or cracking of the lamp socket.

10. Melting, crack, deformation or solidification of the lamp cable or a wiring part.

11. Increased frequency of servicing compared to similar devices put into use at

the same time as the lamp socket.

* When the Check Result columns become insufficient, copy this sheet.

Check items

If you have any questions, please contact Olympus.

Check results (Date)

GX41