Olympus SZ-POL-2 사용 설명서 - 페이지 13

{카테고리_이름} Olympus SZ-POL-2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZ-POL-2 16 페이지. Sz2-ila transmitted illumination attachment

OPTIONAL MODULES

}For the mounting methods, see the Assembly on page 8.

Accessory mount

The SZH-CLJ can be

used.

Centering clamping

knob

Fig. 5

Operating Precautions

# The SZ-ADD does not incorporate a light source. It can be used only in combination with the transmitted illumination

attachment.

# The observation brightness depends on the brightness setting of the transmitted illumination attachment.

The standard combination is with the SZ2-ILA. When high brightness is required, use the SZ2-ILA for the 100 W

halogen bulb.

# The peripheral light may be insufficient at low magnifications. It is recommended to use zoom magnifications of 2.5X

or more.

# When a 1.5X or higher-magnification auxiliary objective is used, the brightness may be insufficient.

When a 0.75X or lower-magnification auxiliary objective is used, the peripheral light may become insufficient.

Centering Procedure

1. Loosen the centering clamping knob @.

2. Place a sheet of thin paper as the specimen and observe it with the

lowest magnification of the microscope.

3. Turn on the illumination and move the main body ² so that the illumina-

tion field comes on the center of the field of view.

4. Tighten the centering clamping knob @.

# When using the SZH-CLJ, tighten the centering clamping knob par-

ticularly firmly so that it is not loosened by rotation of the SZH-CLJ.

Illumination field: 9 mm

Use the stage glass provided

with the transmitted illumina-

tion attachment.

Main body

Drop into the position for

the stage plate.

SZ2-ILA

Stage glass (SP-C)

(Fig. 5)