Olympus SZ1145TR 사용 설명서 - 페이지 2
{카테고리_이름} Olympus SZ1145TR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZ1145TR 16 페이지. Zoom stereo microscope
페이지 인쇄
(1)
As the microscope
is a piece of precision equipment,
always handle with care, avoiding abrupt
movement
or impact during transportation
or Operation of controls.
(2)
Avoid exposure to direct sunlight,
high temperature
and humidity,
dust and Vibration.
(3)
Avoid leaving dir-t or fingerprints
on the lens surfaces, as a dirty mirror or lenses may reduce
image clarity.
(4)
When using photomicrographic
equipment
or a large-size Video Camera, mount the microscope
body at an angle of less than 3" from the perpendicular
in Order to assure microscope stability.
(5)
Use a compact Video Camera, dedicated for C-mount, with a picture area of 2/3" or smaller and
weighing
2.5 kg or less.
(6)
Be sure to hold the Camera with one hand when unloading
film from a large-format
Camera in
Order to prevent it from falling over.
(7)
Never turn the right and left zoom control
knobs in opposite directions,
as malfunction
may
result.
(1)
Clean all glass components
by wiping gently with gauze. To remove fingerprints
or oil smudges,
wipe with gauze slightly moistened with a mixture of ether (70%) and alcohol 130%).
A
Since solvents such as ether and alcohol are highly flammable,
they must be handled carefully.
Be sure to keep these chemicals
away from open flames or potential
sources
of electrical
Sparks - for example,
electrical
equipment
that is being switched
on or off. Also remember
to always use these chemicals
only in a weil-ventilated
room.
(2)
DO not use organic solutions to wipe the surfaces of other components.
Plastic Parts especially,
should be cleaned with a neutral detergent.
(3)
Never attempt to disassemble the microscope as decreased Performance
may result.
(4)
When not in use, be sure to cover the microscope with the dust cover provided, and store in
an area free from moisture to prevent rust.