Olympus SZ51-60 사용 설명서 - 페이지 5

{카테고리_이름} Olympus SZ51-60에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZ51-60 28 페이지. Zoom stereo microscopes
Olympus SZ51-60에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지)

페이지 인쇄

IMPORTANT

The SZ2 series of stereo microscopes are provided with ESD (Electro-Static Discharge) protection specifications. They are

provided with electroconductive coating in their external finish to reduce the surface resistance and grounding lead wires

in their standard base or frame to eliminate static electricity from them.

NOTE

SAFETY PRECAUTIONS

· Hold the bottom of the stand with one hand while holding base column with the other hand to avoid tilting the

· In case the specimen is damaged by erroneous operation, promptly take the infection prevention measures.

2. When the optional 0.5X auxiliary objective a is used, the microscope become unstable due to the use of the SZ2-

ET auxiliary sleeve b . Be careful not to topple down the microscope. )

In addition, when a camera is mounted on the SZ61TR, special care is required because the microscope becomes

more unstable.

Getting Ready

1. A microscope is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight, high temperature and humidity, dust or

vibrations. (For the operating conditions, see "SPECIFICATIONS" on page 13.)

3. Be careful not to leave stains and fingerprints on the lens surfaces.

Contamination of the lens and mirror deteriorates the view of images.

4. Do not turn the left and right zoom adjustment knobs in the opposite directions, as this will result in a failure.

5. The rubber parts of the eyepiece sleeves are fragile and should be handled carefully. If they are damaged, dirt will

penetrate inside the microscope.

Downloaded from

ManualsNet.com

To maintain the ESD protection performance, always use the microscope in combination with the

modules described in this manual or options having the ESD protection specifications. Otherwise, the

grounding will not work properly.

· The eye shades of the eyepieces are not provided with the ESD protection performance. Be sure to

remove them

· The SZ2-SPBW stage plate is provided with the ESD protection performance only in the black surface.

microscope.

search engine

1. After the equipment has been used in an observation of a

specimen that is accompanied with a potential of infection, clean

the parts coming in contact with the specimen to prevent infection.

· Moving this microscope is accompanied with the risk of

dropping the specimen. Be sure to remove the specimen

before moving this product.

SZ2 series