Olympus SZX7 사용 설명서 - 페이지 9
{카테고리_이름} Olympus SZX7에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZX7 32 페이지. Stereomicroscope system
Olympus SZX7에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지)
![Olympus SZX7 사용 설명서](/uploads/products/server2/4283941/4283941.jpg)
OPERATION
4-1 Stand
To decrease
To increase
Fig. 1
4-2 Observation Tube
1
Fig. 2
1
Using the Stage
1. When reflected light illumination is used, the stage plate can be placed
either the white or black surface facing up depending on the specimen.
However, when the ESD performance is required, always use the black
surface of the stage plate.
2. When transmitted light illumination is used, use the transparent glass
stage plate (SP-C).
2
Adjusting the Focus Adjustment Knob Tension
}This operation is intended to facilitate the rotation of the knobs while
preventing spontaneous drop of the microscope body. It is recommended
Clamp.
to set the knob tension to a slightly higher level than the point where
spontaneous drop occurs.
1. Hold the left and right focus adjustment knobs @ with both hands, fix the
left knob and rotate the right knob. The rotation tension of the knobs
1
increases or decreases according to the direction in which the right knob
is rotated.
2. If the rotation tension is increased too much, accurate focusing is not
possible and the mechanism may be damaged.
1
Adjusting the Interpupillary Distance
# Always hold the eyepiece sleeves @ with both hands when adjust-
ing the interpupillary distance.
While holding the left and right eyepiece sleeves @ with both hands,
look through the eyepieces and adjust for binocular vision until the left
and right fields of view coincide completely.
SZX7
(Fig. 1)
(Fig. 2)
6