Olympus U-DO3 사용 설명서 - 페이지 3

{카테고리_이름} Olympus U-DO3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus U-DO3 18 페이지. For 2, 5, 9, 10 and 13 persons
Olympus U-DO3에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지)

페이지 인쇄

This System employs a UIS (Universal Infinity System) Optical design, and should be used only with UIS microscopes,

eyepieces, objectives and condensers for the BX2 series. (Same of the modules designed for the BX series are also

usable. For details, please consult

Olympus or the catalogues.) Less than Optimum Performance may result if

inappropriate accessories are used.

1. This manual pertains only to the discussion attachments. Before using this attachment together with the microscope and

associated Options, make Sure that you have carefully read and understood their manuals, and understand how the

System should be operated together

2. The discussion attachments have a field number of 22. When a discussion attachment is combined with an superwide-

field Observation tube, the pointer cannot be moved around the entire range of the field of view. Also note that a ghost of

pointer may be observed in such a case.

3. If the eyepiece in use incorporates a micrometer, ghost may be observed with dark specimens.

4. To prevent stray light:

Make Sure to cover the eyepieces which are not attended by the assistant observers with stray light prevention covers.

Page 9)

Make Sure to attach taps to the unused Observation tube and side-view tube mounts.

5. Always use the power Cord and AC adapter provided by Olympus. If no power Cord is provided, please select the proper

powercord by referring to the section "PROPER SELECTION OFTHE POWER SUPPLY CORD" at the end of this instruction

manual. If the proper power Cord is not used, product safety and Performance cannot be guaranteed.

6. To ensure safety, disconnect the power plug of the AC adapter from the power outlet after Operation.

7 Fix the AC adapter Cord at positions where it does not come in the way of microscope Operation. Take care not to bring the

power Cord in contact with the lamp housing.

1 Safety Symbols 1

The following Symbols are found on the microscope. Study the meaning of the Symbols and always use the equipment

in the safest possible manner

Supply DC current (from the provided AC adapter).

Indicates an input jack

\'/

c='

'1'

Indicates a pointer

1. Clean all glass components by wiping gently with gauze. To remove fingerprints or oil smudges, wipe with gauze slightly

moistened with a mixture of ether (70%) and alcohol (30%).

ASince

solvents such as ether and alcohol are highly flammable, they must be handled carefully. Be Sure to keep

these chemicals away from open flames or potential sources of electrical Sparks - for example, electrical equip-

ment that is being switched on or off. Also remember to always use these chemicals only in a weil-ventilated room.

2. With any part of the System other than glass components gets dirty do not use organic solvents. If a plastic part gets dirty

use a cloth moistened with a diluted neutral detergent.

3. DO not disassemble

any part of the System. This could result in malfunctions or reduced Performance.

4. When the attachment is not used, make Sure to put the dust cover on it.