Olympus U-DO3 사용 설명서 - 페이지 34

{카테고리_이름} Olympus U-DO3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus U-DO3 40 페이지. For 2, 5, 9, 10 and 13 persons
Olympus U-DO3에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지)

Olympus U-DO3 사용 설명서

5-6 Attaching other units

This section describes attaching the common units for all systems and attaching the option unit.
b
1
a
d
c
30
2
1

Connecting the AC adapter

· Always use the AC adapter and power cord provided by
CAUTION
Olympus. If the proper AC adapter and the power cord
are not used, the electric safety and the EMC (Electro-
Magnetic Compatibility) performance of the product
cannot be assured. If no power cord is provided, please
select the proper power cord by referring to the section
"Proper selection of the power cord" at the end of this
instruction manual.
· The power cord should be connected to a grounded,
3-conductor power outlet. If the power outlet is not
grounded properly, Olympus can no longer warrant the
electrical safety performance of the equipment.
· Before connecting the AC adapter, rotate the pointer
NOTE
brightness control knob in counterclockwise direction to
set to the OFF position.
· The power cord is vulnerable when bent or twisted. Never
subject it to excessive force.
1
Connect the AC adapter's output plug a completely to the AC
adapter input connector b on the left side panel of the observation
attachment body.
2
Insert the power cord connector c to the AC adapter's input connector
d .