Olympus U-FWR 사용 설명서 - 페이지 9

{카테고리_이름} Olympus U-FWR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus U-FWR 12 페이지. Transmitted light/reflected light/observation filter wheels

Fig. 3

...

Fig. 4

Mounting the Filter Wheel on the Microscope

U-FWT Filter Wheel (Figs. 3 & 4)

}The U-FWT can be mounted only to a BX2 series microscope (BX41/51/

52/61/62 microscope frame compatible with reflected light illmination).

1. Loosen the clamping screw ² of the lift prevention pin @ using the Allen

screwdriver.

2. Loosen the 4 clamping screws ³ on each side using the Allen screw-

driver.

3. Fit the filter wheel mount | on the filter holder on the BX2 series micro-

scope.

4. While pushing down the filter wheel mount, tighten the clamping screws

³ uniformly so that the filter wheel mount is parallel with the microscope

base.

5. While pushing down the lift prevention pin @, tighten the clamping screw

².

6. Fit the filter wheel ƒ on the filter wheel mount |. During this, place the

connection cable ... in the cable groove on the back side of the filter

wheel ƒ.

7. Tighten the clamping screws on the left side panel of the filter wheel using

the Allen screwdriver.

8. Connect the connection cable ... of filter wheel to one of connectors FW1,

2 and 3 on the BX-UCB.

U-FWT/FWR/FWO

(Figs. 3 - 5)