Olympus U-IFFH 사용 설명서 - 페이지 31

{카테고리_이름} Olympus U-IFFH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus U-IFFH 36 페이지. Motorized illumination system with motorized focusing unit

8-3 Detailed Assembly Procedure

Fig. 22

Fig. 23

Fig. 24

Attaching the Halogen Bulb

}Use only the designated bulb 12V100WHAL-L (PHILIPS 7724) or

12V50WHAL-L (LIFE JC).

1. Fully loosen the lamp housing clamping screw 1 on top of the lamp

housing using the Allen screwdriver provided with the illuminator.

2. Lift the lamp housing cover 2 upward to remove it.

3. Turn the lamp socket 3 by 90° in the direction indicated by the arrow.

4. Holding the bulb 5 with gloves or a piece of gauze, depress the bulb

clamping lever 4 and insert the bulb pins 6 fully into the pin sections 7

on the lamp socket.

Gently release the bulb clamping lever to the original position to secure

the bulb.

!To prevent reduced bulb life or cracking, do not touch the bulb with

bare hands. If fingerprints are accidentally left on the bulb, wipe the

bulb with a soft cloth.

5. Slide the lamp housing cover onto the housing base from the above.

Tighten the clamping screw 1 while pressing downward on the cover.

(Fig. 22)

!Caution for Bulb Replacement During Use or Right After Use

The bulb, lamp housing and areas near these will be extremely hot

during and right after use.

Set the main switch to "

the wall outlet, then allow the old bulb and lamp housing to cool

before replacing the bulb with a new of the designated type.

(Figs. 22 to 24)

" (OFF), disconnect the power cord from

BXFMA