Olympus PER-E01 사용 설명서 - 페이지 5

{카테고리_이름} Olympus PER-E01에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PER-E01 10 페이지. Underwater extension ring for pt-e series

Dismounting the PER-E01

CAUTION:

When removing the PPO-E series lens port and PER-E01 from the case, water drops on the

O-rings may splash on the lens or camera. If this happens, wipe the water drops away from

the lens and camera with a dry cloth.

Make sure that the PER-E01 is completely dry before dismounting.

If any water is on the product, wipe it completely away and

make sure that the product is dry.

Holding the PT-E series case firmly with one hand, loosen the

PPO-E series lens port that is attached to the PER-E01 by

turning the PPO-E about 90 degrees counterclockwise. If the

PPO-E is screwed in too tight, wrap it with a piece of rubber or

other slip-resistant material.

After loosening the PPO-E series lens port, point its lens

down and turn it further counterclockwise until it is separated

from the PER-E01. Be careful not to drop the PPO-E, PER-

E01 or PT-E.

Holding the PT-E series case firmly with one hand, loosen the

PER-E01 by turning it about 90 degrees counterclockwise. If the

PER-E01 is screwed in too tight, wrap it with a piece of rubber or

other slip-resistant material.

After loosening the PER-E01, point its lens down and turn it

further counterclockwise until it is separated from the PT-E

series case. Be careful not to drop the PER-E01 or PT-E.

E-4