Olympus PT E06 사용 설명서 - 페이지 13

{카테고리_이름} Olympus PT E06에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PT E06 30 페이지. Underwater camera case

When using the TTL cable

When connecting the optional electronic flash with the underwater TTL cable (optional: PTCB-E01),

connect the hot shoe cable (optional: PHCB-01) to the camera and front cover of the Case.

Connecting the underwater TTL cable

1 Turn the TTL connector cap of the Case counter-

clockwise and remove it.

2 Connect the underwater TTL cable (optional:

PTCB-E01) to the TTL connector on the Case.

3 When not using the underwater TTL cable,

attach the TTL connector cap.

Make sure there is no foreign matter attached to the

O-rings inside the cap and on the TTL cable

connector. After that, gently turn it clockwise until it

stops.

Check O-rings

Cap

CAUTION:

If the TTL connector cap is loose, water leakage may result.

How to connect the hot shoe cable

1 Turn the hot shoe cable connector cap inside the Case counter-clockwise to remove it.

2 Insert the connector of the hot shoe cable into the Case's connector and turn the connector screws

all the way clockwise to connect them firmly.

3 Load the camera in the Case, and then connect the hot shoe cable to the camera.

Connector

Insert into the

connector.

Turn the threaded

section of the

connector clockwise

gently until it stops.

Underwater

TTL cable

Use this mark to

align the position.

EN 12