Olympus PT-019 사용 설명서 - 페이지 21

{카테고리_이름} Olympus PT-019에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PT-019 38 페이지. Waterproof case

Mounting and Removing the Lens Cap

Fit the lens cap onto the lens

ring as shown in the figure. Be

sure to remove the lens cap

before shooting.

After sealing the Case, check the sealing part of front and rear lid

visually to confirm that the O-ring is not twisted or out of the groove

and that no foreign matter has been caught.

CAUTION

: • Hairs, fibers, and other narrow items are not very apparent,

but they may cause entry of water, so that special attention

is required.

Move the power switch lever and confirm that the camera power

can be switched ON and OFF.

After sealing, turn the mode dial knob and confirm that the mode

dial of the camera is switched.

CAUTION

: • After loading the camera into the Case, confirm that the

mode dial moves. If it does not move, there is the possibility

that oil or fat has been attached to the mode dial. Please

wipe it clean.

• When no operation is performed for three minutes after the

digital camera has been loaded (or for the specified time

when a different time has been specified), the camera

enters into sleep mode (standby status) to save battery

power. It returns to operation status when the shutter button

or the zoom lever is operated.

For details, refer to the instruction manual for the digital

camera.

E-20