Olympus PT-022 사용 설명서 - 페이지 22

{카테고리_이름} Olympus PT-022에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PT-022 43 페이지. Underwater case

Set the mode dial.

After the digital camera has been

loaded, push down the mode dial

of the case from the upper surface

of the case and set it so that the

lower part of the mode dial of the

case on the inside of the case fits

properly onto the upper part of the

mode dial of the digital camera.

Advice • After setting the mode dial of the case, set the power of the digital

camera to 'OFF', and before sealing the case, operate the mode

dial and confirm that the mode of the digital camera is switched.

Before sealing the Case, insert the accessory silica gel bag for

prevention of fogging between the bottom of the camera and the

Case. Insert the bag with the glued longer side to the inside.

Pay attention to the orientation.

CAUTION

: • Insert the silica gel all the way at the specified location

and with the specified orientation. When the orientation

is not correct, the silica gel bag will be caught when the

Case is sealed and water leakage will be caused.

• When it is tried to seal the Case with the bag inserted only

part of the way, the silica gel bag will be caught by the O-

ring and water leakage will be caused.

• Once silica gel has been used, the moisture absorption

performance will be impaired. Always exchange the

silica gel when the Case is opened and closed.

E-21