Olympus PT-048 사용 설명서 - 페이지 18

{카테고리_이름} Olympus PT-048에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PT-048 32 페이지.

Seal the Case

1 Close the Case gently while aligning the mounting projection of the rear lid

and groove.

2 Turn the open/close dial clockwise.

• The Case is sealed.

CAUTION:

• If the open/close dial is not fully turned, the Case will not be sealed. This

will cause water leakage.

• Close the rear lid of the Case so that the lens cap or LCD hood strap

doesn't catch. If it catches, water leaks may result.

After sealing the Case, check that the camera operations normally.

1 Push the ON/OFF button on the Case and confirm that the camera

turns ON/OFF.

2 Press the shutter lever on the Case and confirm that the camera

shutter releases.

• Also operate other control buttons on the Case and confirm that the

camera functions properly.

EN 18