Olympus PT-055 사용 설명서 - 페이지 14

{카테고리_이름} Olympus PT-055에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PT-055 32 페이지.

2. Advance Check of the Case

This Case has been the subject of thorough quality control for the parts

during the manufacturing process and thorough function inspections

during the assembly. In addition, a water pressure test is performed with

a water pressure tester for all products to confirm that the performance

conforms to the specifications.

However, depending on the carrying and storage conditions, the

maintenance status, etc., the waterproof function may be damaged.

Before using, always perform the following advance checks.

Advance Check

1 Before installing the digital camera in the Case, immerse the empty

Case to confirm that there is no water leakage.

We recommend to immerse the empty Case to the intended water

depth, however, if you cannot perform this way, check the Case by

referring "Water Leakage Test" (P.18).

2 Main causes of water leakage are as follows.

• The O-ring has not been installed.

• A part of the O-ring or the entire O-ring is outside the specified

groove.

• O-ring damage, cracks, deterioration or deformation

• Sand, fibers, hair or other foreign matter sticking to the O-ring, the

O-ring groove or the O-ring contact surface on the front lid

• Damage to the O-ring groove or the O-ring contact surface on the

front lid

• Catching of the strap, silica gel, etc. when closing the Case

Perform the test after the above causes have been eliminated.

CAUTION:

If a leak is detected in normal handling, do not use the Case and contact

Olympus.

EN 14