Olympus BX3-SSU 사용 설명서 - 페이지 5

{카테고리_이름} Olympus BX3-SSU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX3-SSU 20 페이지. Scanning stage with ultrasonic
Olympus BX3-SSU에 대해서도 마찬가지입니다: 사용 설명서 (24 페이지)

페이지 인쇄

Getting Ready

1. The scanning stage with ultrasonic is a precision instrument. Handle it with care and avoid subjecting it to sudden or

severe impact.

2. When the scanning stage with ultrasonic needs to be packaged for forwarding to a remote location, it should be clamped

using clamping hardware. Please contact Olympus (to obtain advice).

3. Do not use the instrument where it is subjected to direct sunlight, high temperature and humidity, dust or vibrations.

Also avoid using it in the following places.

(1) Near an air intake or outlet of an air conditioning facility, etc.

(2) Place subject to important vibrations or changes in temperature.

(3) Near a source (including equipment not manufactured by Olympus) of abnormal noise.

(4) Place subject to direct sunlight.

(5) Place exposed to excessive dust or high temperature/humidity.

(6) Near a flammable substance (gasoline, lacquer thinner, alcohol, etc.).

4. Leave certain slack to the stage cable so that they are not over-tensioned when the stage is moved.

5. Do not touch this stage unless it needs to be stopped urgently. it should not be touched except for emergency stop

purpose in order to prevent the position information from being deviated. If this happens, turn the stage off then on

again.

Also note that the stage movement may become temporarily unsmooth after it has been moved by hand.

6. Whenever emergency stop is necessary during motorized movement, the stage can be stopped by holding it by hand.

7. Before replacing the fuse, be sure to set the main switch of the control box to "

safety.

Maintenance and Storage

1. To clean the parts, simply wipe them with a clean cloth. If a part is extremely dirty, do not use organic solvents but use a

soft cloth slightly moistened with a diluted neutral detergent.

2. Do not disassemble any part of the microscope except for the parts that are specified to be disassembled in this manual,

as this could result in malfunction or reduced performance.

3. Before disposing of this product, be sure to follow the regulations and rules of your local government.

Caution

If the instrument is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

CAUTION

}

: Indicates a potentially hazardous situation which, if not avoided, may result in minor

or moderate injury or damage to the equipment or furniture in the surroundings. This

symbol is also used to warn against risky actions.

: Indicates commentary (for ease of operation and maintenance).

BX3-SSU

" (OFF) and unplug the power cord for