Olympus OCS-500 사용 설명서 - 페이지 12

{카테고리_이름} Olympus OCS-500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus OCS-500 40 페이지.

Olympus OCS-500 사용 설명서

Chapter 3 Installation and Connection

Chapter 3 Installation and Connection
3.1

Inspecting the small tray joint

8
Before each case, Prepare and inspect this instrument as
instructed below. Inspect other equipment used with this
instrument as instructed in their respective instruction
manuals. Should the slightest irregularity be suspected, do
not use this instrument and see Chapter 6,
"Troubleshooting". If the irregularity is still suspected after
consulting Chapter 6, contact Olympus. Damage or
irregularity may compromise patient or user safety and may
result in more severe equipment damage.
Prepare this instrument and other compatible equipment (shown in the "System
chart" in the Appendix) before each use. Refer to the respective instruction
manual for each piece of equipment. Also prepare paper towels, basin, lint-free
cloth and personal protective equipment, such as eye wear, a face mask,
moisture-resistant clothing and chemical-resistant gloves, for the particular case.
Refer to the respective instruction manual for each piece of equipment.
If the small tray is not securely connected to the stand, the
small tray and other mounted devices may fall off. If you find
that any of the connections cannot be fully secured, stop
operation immediately and contact Olympus.
Confirm that the small tray is securely connected to the stand without any play
(see Figure 3.1).
COLPOSCOPE OCS-500