Olympus PR-V416Q 매뉴얼 - 페이지 2

{카테고리_이름} Olympus PR-V416Q에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PR-V416Q 18 페이지. Single use cannula v

페이지 인쇄

The Innovative V-System Exchange Capability Makes

Olympus' ERCP Cannulae Even More Efficient

The Innovative V-System Design Lets You Proceed

with Confidence and Efficiency

The V-System is a complete system that integrates Olympus endoscopes and EndoTherapy devices. The revolutionary

V-System design offers the option of guidewire manipulation by the physician or the assistant, allows easier exchange

of catheters, and enhances cannulation capability.

C-Hook

Now endoscopists have the option to

manipulate guidewires and devices.

The convenient C-Hook allows the device handle to be attached to the endoscope's control section, putting

it within easy reach of the endoscopist. With the device handle right at hand, the endoscopist can maneuver

the guidewire, inject contrast media, and manipulate the handle — all while keeping a grip on the scope

control section.

V-Marking

Indicates when to raise and lower

the V-Groove forceps elevator.

The exclusive V-Marking is located on the proximal side of the sheath. When this marking reaches the

channel port on the scope's control section, it indicates that the device tip has reached the distal end of

the scope and the V-Groove forceps elevator may be lowered. When withdrawing the device from the

scope, the same marking indicates when to raise the elevator to lock the guidewire.

Excellent visibility under

fluoroscopy

The platinum marking at the distal

end ensures that the tip is clearly

visible under fluoroscopy.

Wide selection of cannulae

A full line-up of 8 models of different

tip designs and diameters is available

to meet every clinical requirement.

Smooth cannulation of

even minor or

constricted papilla

The X-PressV's cross-cut round

tip is not only ideally suited for

smooth cannulation of the papilla

Short taper (PR-V414Q)

of Vater, but is also equally effective

for cannulation of the minor or

constricted papilla.

Long taper (PR-V420Q)

Standard position of

During guidewire

X-PressV cannula

insertion or fluid injection

Expanded guidewire

compatibility

Compatible with guidewires of

various sizes.

Comprehensive distal

marking system

Cannulation depth is indicated by

markings at 3mm intervals at the

distal end.

Single-use design for

convenience and reliability

All the cannulae in this line are

designed for single use only.

Standard (PR-V416Q)

Short taper (PR-V418Q)

Taper (PR-V434Q)

Taper (PR-V435Q)

Slit (PR-V427Q)

Ball Tip (PR-V223Q)