Olympus UHI-4 빠른 참조 매뉴얼 - 페이지 3
{카테고리_이름} Olympus UHI-4에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus UHI-4 4 페이지. Insufflator
페이지 인쇄
Disclaimer: Information provided in this guide is not exhaustive. Please refer to the complete Instructions For Use for each
item of equipment which should be thoroughly read and understood prior to handling, use and storage of the equipment.
Insufflator Controls
Power Switch
Set Pressure
Smoke Evacuation
CO
Connector
2
Connector
Issue 1
05/02/2021
UHI-4 Insufflator Quick Reference Guide
Actual Pressure
Volume Indicator
Flow Rate
Smoke Evacuation
Start/Stop
Speed
Troubleshooting
Low or no pressure
•
Check insufflation tubing connected to insufflator, switched on and tap on port turned on.
•
Check gas level and that gas cylinder is turned on Increase flow rate or pressure.
Excessive pressure alarm continuously sounds
•
The high pressure alarm will sound if the patient anaesthetics are no longer effective,
consult the anaesthetist.
Smoke Evacuation does not work
•
Check the smoke evacuation speed is not set to OFF.
•
The flow rate on the insufflator is set to MEDIUM or HIGH
Useful Part Numbers
WA95005A
Insufflation tubing box 20
WA95007A
Smoke Evacuation tubing box 20
KMF-08929
NCDR 02867