Olympus CKX-NU 사용 설명서 - 페이지 17

{카테고리_이름} Olympus CKX-NU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CKX-NU 36 페이지. Reflected fluorescence system

Fig. 2

Fig. 3

Centering the Mercury Burner

}Before proceeding to center the burner, wait for the arc

1. Remove the cap (or objective) from a revolving nosepiece

2. Push in the fluorescent mirror switching knob 1 to engage

3. Turn the field iris diaphragm lever 2 clockwise to open the

4. Place a piece of white paper, such as copy paper, on the

}The arc image can be confirmed more easily by using the

# If the arc image is too bright, insert the ND filter 4 into

# If the arc image focusing position cannot be identified

REFLECTED FLUORESCENCE SYSTEM

image to stabilize. To protect against glare during arc image

centering, it should be viewed across the excitation light

protective shield.

position and engage this position in the light path.

the B-excitation mirror in the center position in the light path.

iris diaphragm.

top of the stage, set the filter slider 3 to the center position

and project the arc image.

U-CST centering target screen.

the filter pocket 5 and engage it in the light path. When

the 32ND25 is used, the transmittance is 25%.

easily, close the field iris diaphragm.

FOR CKX41

(Figs. 2 to 6)