Olympus MX61A 매뉴얼 - 페이지 36
{카테고리_이름} Olympus MX61A에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus MX61A 48 페이지. Motorized 300 mm compatible semiconductor/fpd inspection microscope
페이지 인쇄²
CONFIG 3/6 screen
33
@
5
|
³
CONFIG 3/6 Screen Setup
}The CONFIG 3/6 screen is used to set the light intensity ratios according
to objectives.
The default values are the light intensity ratios for BF observation. The
values are corrected automatically when other observation light path is
selected.
1. If it is required to modify a default setting, touch the desired objective No.
switch @.
2. Touch the LAMP up or down switch ² to vary the lamp brightness. The
switch can be touched successively (within the setting range from 0.1 to
12 V).
3. Set the values of other objectives as required.
4. The selected values are entered at the moment the NEXT switch ³ is
touched.
Other Switches
³NEXT: Touch this switch to advance to the CONFIG 4/6 screen.
The lamp brightness set in the CONFIG 3/6 screen starts to be
applied from the CONFIG 4/6 screen.
|BACK: Touch this switch to return to the CONFIG 2/6 screen without
applying the lamp brightness setup.