Olympus SZ2-STB2 사용 설명서 - 페이지 5

{카테고리_이름} Olympus SZ2-STB2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZ2-STB2 12 페이지. Arms used with microscopes for equipment mounting

ASSEMBLY

SZ2-STS or

SZ2-STB2

Fig. 1

SZ2-STB1

Fig. 2

SZ2-STS, SZ2-STB2 or SZ2-STB3

Loosen the clamping knob @, fit the equipment mounting hole into the

pole ² of the system and tighten the clamping knob @ firmly.

# When mounting the equipment for the SZX, remove the drop-preven-

tion ring from the stand.

# Do not tighten the clamping knob while the pole is not inserted into

the equipment mounting hole.

SZ2-STB1

1. Loosen the clamping screw on the mount section of the equipment, insert

the equipment mounting shaft ³ into the mount section, and tighten the

clamping screw.

2. The equipment mounting shaft can be inserted from either up or down.

When it is required to attach a heavy object such as a photography unit, it

is recommended to insert the equipment mounting shaft from the upward

direction.

3. To adjust the angle of the optical axis of microscope, loosen the retaining

screws | using the provided Allen wrench, adjust the angle, and then

tighten the two retaining screws that can be tightened.

SZ2-STS/STP/STB1/STB2/STB3

(Figs. 1 to 3)