Olympus SZ2-STP 사용 설명서 - 페이지 5
{카테고리_이름} Olympus SZ2-STP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZ2-STP 12 페이지. Arms used with microscopes for equipment mounting
![Olympus SZ2-STP 사용 설명서](/uploads/products/server2/4291178/4291178.jpg)
ASSEMBLY
SZ2-STS or
SZ2-STB2
Fig. 1
SZ2-STB1
Fig. 2
1
Mounting on the Equipment
@
SZ2-STS, SZ2-STB2 or SZ2-STB3
Loosen the clamping knob @, fit the equipment mounting hole into the
pole ² of the system and tighten the clamping knob @ firmly.
# When mounting the equipment for the SZX, remove the drop-preven-
tion ring from the stand.
²
# Do not tighten the clamping knob while the pole is not inserted into
the equipment mounting hole.
SZ2-STB1
1. Loosen the clamping screw on the mount section of the equipment, insert
the equipment mounting shaft ³ into the mount section, and tighten the
clamping screw.
2. The equipment mounting shaft can be inserted from either up or down.
When it is required to attach a heavy object such as a photography unit, it
|
is recommended to insert the equipment mounting shaft from the upward
direction.
³
3. To adjust the angle of the optical axis of microscope, loosen the retaining
screws | using the provided Allen wrench, adjust the angle, and then
tighten the two retaining screws that can be tightened.
SZ2-STS/STP/STB1/STB2/STB3
(Figs. 1 to 3)
4