Olympus SZX2-ILLC10 사용 설명서 - 페이지 4

{카테고리_이름} Olympus SZX2-ILLC10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZX2-ILLC10 16 페이지. Coaxial vertical illuminators

IMPORTANT

Getting Ready

1. This manual pertains only to the operating procedure of the coaxial vertical illuminators. Make sure that you also read the

instruction manuals for the SZX16/SZX10/SZX7 microscope and light source so that you understand the overall operating

instructions of the entire microscope system.

2. The coaxial vertical illuminator is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe

impact.

3. To avoid breaking the light guide fiber (for this reduces the amount of light available), use the light guide with bending

radius of 60 mm or more.

4. Do not use the coaxial vertical illuminator where it may be subjected to direct sunlight, high temperatures and humidity,

dust or vibrations.

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks -- for example, electrical

equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

2. Do not use organic solvents to clean non-optical components. If smudges are difficult to clean, wipe them with a soft cloth

slightly moistened with a diluted neutral detergent.

3. Never disassemble any part of the unit as this could cause malfunctions or reduced performance.