Olympus SZX2-ILR66 사용 설명서 - 페이지 11

{카테고리_이름} Olympus SZX2-ILR66에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZX2-ILR66 28 페이지. Led four-part ring illuminator system

Fig. 2

LED FOUR-PART RING ILLUMINATOR SYSTEM

Mounting on SZX10/7 or MVX10 (Fig. 2)

1. Using the Allen screwdriver provided with the microscope, loosen the two

clamping screws ² on the SZX2-ILR66 illuminator @.

2. Insert the SZX-LGR66 ring light guide adapter ³ all the way into the SZX2-

ILR66 @ and tighten the clamping screws ² using the Allen screwdriver.

3. Loosen the clamping screw | on the SZX-LGR66 ³ using the Allen

screwdriver.

4. Fir the SZX-LGR66 ³ into the objective ³ of the SZX10/7 or MVX10 until

the front tip of the SZX-LGR66 ³ is aligned with that of the objective 5,

and tighten the clamping screw | using the Allen screwdriver.

# When the DFPLAPO1.5X-4/DFPL2X-4 objective is used, the SZX-LGR66

should be fixed at a position about 10 mm higher than the front tip of

the objective in order to obtain optimum illumination.

# When either objective mentioned below is used, the working distance

is reduced slightly:

When the SZX10/7 is used: By 11 mm with the SZX-ACH1X. By 1.5 mm

with the SZX-ACH1.25X.

When the MVX10 is used: By 6.5 mm with the MVPLAPO0.63X. By 3.5

mm with the MVPLAPO1X.