AccuLine 40-6680 서비스 매뉴얼 - 페이지 2

{카테고리_이름} AccuLine 40-6680에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AccuLine 40-6680 16 페이지. 5 beam laser pointer
AccuLine 40-6680에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

페이지 인쇄

1.0 Introduction

40-6680 5 beam laser pointer is a highly accurate instrument. Out side of a few

customer adjustments (outlined in the owners manual), all adjustments/service

operations are internal to the instrument and to be performed only by authorized

service personnel. Authorized personnel should adhere to the guidelines

described within this service manual for all repairs and/or service work. This

manual is written with the assumption that a unit is disassembled or assembled

from start to finish. In reality, only component parts or modules would be

replaced during a repair. Given this, procedures discussed in this manual should

be adjusted according to the repair being made.

2.0 Overall Unit Disassembly

Item

JLT Part #

AP1572

M2.5 x 10 Cross Plate Screw

AP1820

On/Off Knob

AP1821

Housing Part

AP1822

Battery Cover

AP1823

Body Module

AP1824

M2.5 x 12 Cross Sunk Screw

Open the battery cover (4#) and remove 3*AA battery;

Using a Phillips screwdriver, remove M2.5×10(1#) screw,

and remove on/off knob (2#).

Using a Phillips screwdriver, remove 4 cross-slot sunk

screws M2.5×12(6#) through the bottom aperture (as

shown in the to the right.



Note that rotating the base at 90 intervals exposes

each of the 4 screws.



Once all 4 screws have been removed carefully lift

housing part (3) off of body module (5) taking care

not to damage the battery and power indicator

wires.

Disconnect the power plug and indicator light plug

connecting to the main circuit board module and housing

part (3#).

Prepared By: Tim Wojo

Description

Qty

Revision - Date: 0 – 20080430

40-6680 Service Manual

AA电池

3 AA Batteries

Page 2 of 16