Alpha-InnoTec LWP450AR3 운영 매뉴얼 - 페이지 7
{카테고리_이름} Alpha-InnoTec LWP450AR3에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha-InnoTec LWP450AR3 20 페이지. Air/water heat pumps
3.4 Accessories
The following accessories are available for the device
through the manufacturer's local partner:
Domestic hot water tank
Room thermostat to switch the cooling function
Dew point monitor to protect a system with cooling
Recirculating pumps
Switching valves
Connection kit with vibration decoupling for
heating circuit
Connection kit with vibration decoupling for
desuperheater
3.5 Function
Liquid refrigerant is evaporated (evaporator), the
energy for this process is environmental heat and
comes from the outside air. The gaseous refrigerant is
compressed (compressor), this causes the pressure
to rise and therefore the temperature too. The
(condenser).
The high temperature is hereby discharged to the
heating water and is used in the heating circuit.
The liquid refrigerant at a high pressure and high
temperature is depressurised (expansion valve).
The pressure and temperature drop and the process
begins again.
The heated heating water can be used for the domestic
hot water charging or for the building heating. The
temperatures required and use are controlled by the
heat pump controller. Reheating, drying out screed or
increasing the domestic hot water temperature can be
carried out by using an electric heating element, which
is activated by the heat pump controller as and when
necessary.
The vibration decouplers (accessories) for the
hydraulics
prevent
structure-borne
and therefore into the building.
Subject to technical amendments without notice | 83059700gUK – Translation of the operating manual | ait-deutschland GmbH
Cooling
Cooling is integrated in the units. The following
options are possible for units with cooling function
(
operating manual for the heating and heat pump
controller):
Active cooling
Control of the cooling function via the heating and
heat pump controller
Changeover
operation
sound
and
between
heating
and
cooling
7