Axmin UE-153DV1 운영 매뉴얼 - 페이지 11
{카테고리_이름} Axmin UE-153DV1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axmin UE-153DV1 18 페이지. Small band saw machine
페이지 인쇄Changing Blade
1.
Raise this saw head up-to proper position
by lifting up the arm Fig.11.
Fig. 11
2.
Remove the blade guard by loosening two
screws (U) in Fig. 12 on the saw frame.
Fig. 12
3.
Remove blade cover by loosening blade
cover's screws on the saw frame as Fig.13.
Fig. 13
4.
Turn the blade tension knob W in Fig.14,
Counter-clockwise let the blade slip off the
wheel.
5.
Remove blade from both wheels and blade
guides bearings in Fig.15.
U
6.
Place a new blade on the wheels but not
too tight, twist blade slightly and let it slip
into between each of guide bearings. Make
sure the teeth of blade face down toward
the bed.
7.
Turn the tension knob clockwise to make
the blade tension be tensioned properly.
8.
Replace blade cover in Fig.13 and guards
Fig.12.
9.
Start the machine to see that the blade
runs properly.
Caution: Be sure that the machine is
disconnected from the power source before
attempting to service or take any
component away!
- 9 -
W
Fig. 14
Blade guides bearings
Fig. 15