Axminster SIEG 사용자 설명서 - 페이지 12

{카테고리_이름} Axminster SIEG에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster SIEG 16 페이지. Powered hacksaw

Routine Maintenance...

Excessive dust in the motor can cause excessive heat to develop. Every effort should be

made to prevent foreign material from entering the motor. When operated under conditions

likely to permit accumulations of dust, dirt or waste, a visual inspection should be made at

frequent intervals.

Accumulations of dry dust can usually be blown out successfully.

Caution: To avoid eye injury or adverse reaction to dust, high pressure hoses should

not be used especially in poorly ventilated areas. The operator performing this cleaning

function should wear safety goggles and dust filter mask.

Every 2 hours of use, apply a general purpose grease to the arm slides via the grease

nipples provided with a high pressure grease gun.

If the machine is going to stand idle for any length of time, a light coat of spray or machine

oil over the vice, bed and other non painted parts will prevent rusting.

DO NOT use the machine if the power cable has become damaged.

If any servicing (other than the above cleaning) becomes necessary the unit should be

returned to your supplier or repaired by a qualified technician.

WARNING!!

DISCONNECT THE MACHINE FROM

THE MAINS SUPPLY.

Oil