Axminster TS-200 사용 설명서 및 부품 목록 - 페이지 2
{카테고리_이름} Axminster TS-200에 대한 사용 설명서 및 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster TS-200 17 페이지. 200mm table saw
페이지 인쇄
This manual has been prepared for the owner and operators of Model TS200 200mm table saw. Its purpose,
aside from machine operation, is to promote safety through the use of accepted correct operating and
maintenance procedures. Completely read the safety and maintenance instructions before operating or
servicing the machine. To obtain maximum life and efficiency from your wood lathe, and to aid in using the
machine safely, read this manual thoroughly and follow instructions carefully.
Table of Contents
Safety Rules ........................................................................................................ .......................2
Safety Decals ..............................................................................................................................4
General Safety Procedures for table saw.........................................................................................4
Grounding Instructions .................................................................................................................................5
Features ......................................................................................................................................6
Specifications ............................................................................................................................. 6
Receiving .....................................................................................................................................6
Installation & Assembly ............................................................................................................... 7
Mounting and Adjusting the Splitting Wedge ....................................................................................7
Adjusting the Longitudinal Limit Stop .............................................................................................8
Adjusting the Cutting Height.........................................................................................................8
Adjusting the Pivot.....................................................................................................................8
Working with the circular table saw................................................................................................9
Cutting narrower work pieces, edges and strips ..............................................................................9
Diagonal limit stop.......................................................................................................................9
Cross--Cutting narrower work pieces........................................................................................... 10
Angular limit stop ..................................................................................................................... 10
Malfunctions ............
.............................................................................................................................. 11
Parts Lists & Exploded Views Table Saw ..................................................................................... 12-14
Optional Accessories ................................................................................................................ 15
Safety Rules
As with all machines, there is a certain amount of hazard involved with the use of this table saw. Use the
machine with the respect and caution demanded where safety precautions are concerned. When normal
safety precautions are overlooked or ignored, personal injury to the operator can result.
Read, understand and follow the safety and operating instructions found in this manual. Know the
limitations and hazards associated with this table saw.
Electrical grounding. Make certain that the machine frame is electrically grounded and that a ground lead
is included in the incoming electrical service. In cases where a cord and plug are used, make certain that
the grounding plug connects to a suitable ground. Follow the grounding procedure indicated in the National
Electrical Code.
Eye safety. Wear an approved safety shield, goggles, or glasses to protect eyes. (NOTE: Common
eyeglasses are not safety glasses.)
Personal protection. Before operating the machine, remove tie, rings, watch and other jewelry and roll up
sleeves above the elbows. Remove all loose outer clothing and confine long hair. Protective type footwear
should be used. Do not wear gloves.
Guards. Keep the machine guards in place for every operation for which they can be used. If any guards are
removed for maintenance, DO NOT OPERATE the machine until the guards are reinstalled.
Work area. Keep the floor around the machine clean and free of scrap material, saw dust, oil and other
liquids to minimize the danger of tripping or slipping. Be sure the table is free of all scrap, foreign material
and tools before starting to cut. Make certain the work area is well lighted and that a proper exhaust system
is used to minimize dust. Powermatic recommends the use of anti-skid floor strips on the floor area where
the operator normally stands and that each machine's work area be marked off. Provide adequate work
space around the machine.
Operator position. Maintain a balanced stance and keep your body under control at all times. Do not stand
2