Axminster UE-125DV 운영 매뉴얼 - 페이지 5

{카테고리_이름} Axminster UE-125DV에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster UE-125DV 16 페이지. Portable bandsaw machine

BEFORE CUTTING

Release the lock pin (A) in Fig.1 to free this

saw. After service, must relock in the pin

properly for your safety and carry. Failure to

comply with the warning could result in

personal injury and machine damage.

Before Cutting and Pump Grease

ATTENTION

Pump grease into the gear reducer every

week to lubricate the gears avoid gears got

high temperature when machine be used

continuously.

Choose super high-density grease.

Grease Nipple

Grease nipple located at rear of gear reducer

Use grease gun pump in grease from grease

nipple.

Fig. 1

2. The Quick Vise and Work Set

The vise is mounted on the machine base.

Follow the easy steps to open or close the vise.

1. Turn the handle (A) in Fig.2 counter

clock-wise to open the vise jaw to allow the

width of vise can load work piece.

2. Make sure the work piece is well located on

the table. Turn the handle (A) in Fig.2

clock-wise to close the vise jaw to clamp the

work piece.

NEVER OPERATE SAW WITHOUT BLADE

GUARDS IN PLACE.

Raise saw head to proper position in Fig.3.

Open vise to accept the piece to be cut by

pulling the hand lever at the end of the

base.

Place work piece on saw bed if the piece is

long, support the end.

- 3 -

Fig. 2

CAUTION !

Fig.3