Axminster AW1416VS 사용자 설명서 - 페이지 4

{카테고리_이름} Axminster AW1416VS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster AW1416VS 20 페이지. Woodturning lathe

Axminster AW1416VS 사용자 설명서

Optional Accessories...

W
A X M I N S T E R
W H I T E
1 off
2 off
I

General Instructions for 230V Machines...

Good Working Practices/Safety
The following suggestions will enable you to observe good working practices,
keep yourself and fellow workers safe and maintain your tools and equipment
in good working order.
!
Primary Precautions
These machines are supplied with a moulded 13 Amp. Plug and 3 core power cable. Before using the
machine inspect the cable and the plug to make sure that neither are damaged. If any damage is
visible, have the tool inspected/repaired by a suitably qualified person. If it is necessary to replace the
plug, it is preferable to use an 'unbreakable' type that will resist damage. Only use a 13 Amp plug, and
make sure the cable clamp is tightened securely. Fuse as required. If extension leads are to be used,
carry out the same safety checks on them, and ensure that they are correctly rated to safely supply the
current that is required for your machine.
Work Place/Environment
Make sure when the machine is placed that it sits firmly on the bench or stand, that it does not rock,
that it is sufficiently clear of adjacent obstacles so that you have unimpeded access to all parts of the
machine. The machine is designed for indoor use, do not use when or where it is liable to get wet.
Keep the machine clean; it will enable you to more easily see any damage that may have occurred.
Clean the overall machine with a damp soapy cloth if needs be, do not use any solvents or cleaners, as
these may cause damage to any plastic parts or to the electrical components. Clean the machine
components with a lightly oiled cloth. If the machine is liable to be standing idle for any length of
03
time a light coat of machine or spray oil will minimise rusting.
Extension Bed (Order No: 951249)
M8 x 30mm Caphead Bolts & M8 Spring/washer
WARNING!
H
KEEP TOOLS AND EQUIPMENT OUT
OF THE REACH OF YOUNG CHILDREN
H
I